Add:Dixiu Road No.759, Jiangning Binjiang Development Zone, Nanjing, China





Home > News > Content
Roller Frame Operation Safety Rules
Jul 23, 2018

The maximum temperature at the contact of the rubber wheel is not allowed to exceed 75 degrees, otherwise there may be damage to the rubber wheel. .

5. When using, the roller should be in full contact with the workpiece. It is strictly forbidden to contact the weld or the sharp part. At the same time, when the workpiece is hoisted, it is strictly forbidden to hit the roller to prevent the roller or other parts from being damaged. In the case that the equipment is not fixed, it is very likely that the impact will be strong. Lead to the subversion of the whole machine.

6. The debugging roller frame is gradually adjusted from high speed to high speed during starting. When the steering is changed, the motor can be switched after the motor stops, otherwise the motor will be burnt. During operation, it is strictly forbidden to separate the man and the machine, and it is strictly forbidden to stand in the radius of the workpiece.

7. In order to ensure the performance of the equipment, the lubricating parts should be added to the transmission parts before use, and the equipment should be filled out with the daily inspection and maintenance records. After using the machine for a period of time, it should be checked regularly and the maintenance record form should be filled out.

8. The equipment uses three-phase 380V AC power supply. The power supply line must pass the air switch for safe operation. When the equipment is commissioned, turn on the power and press the start button to observe the rotation of the driving wheel. If the speed adjustment is normal, if there is any abnormality, The power should be cut off immediately to find out the cause. After the fault is eliminated, the test machine can be re-energized.

9. Check and remove obstacles on the equipment before use, and need to be used and kept by someone. Do not touch oil and fire on the roller frame unit (rubber wheel).